Gauge Panel Blanks

More
5 years 8 months ago #17547 by EnseNADAslim
EnseNADAslim created the topic: Gauge Panel Blanks
I see many set ups for Gauge panels, but is there, or are there basic cut panels out there to start with? I've seen some on "The Samba" but it would be nice to have nice blank to start with. And yea, I could most likely cut and beed my own,,,but then I'd need the tools to do it, however there is a nice hand crank bead roller available at Eastwood.com.

Please Log in or Create an account to join the conversation.

More
5 years 8 months ago #17578 by L5wolvesf
L5wolvesf replied the topic: Re: Gauge Panel Blanks
I just did an AL panel in the radio hole for the smaller gauges.
The original speedo hole holds a 5" Autometer tach really good with just a small relief cut.

Larry

Amonster Motorsports
Class 11 # 1196 - Sponsored by:
- www.356carburetorrescue.com/home.html
- BarnWerks Fabrication & Welding
- ArtSpeed Graphics

Please Log in or Create an account to join the conversation.

More
5 years 8 months ago #17580 by paulfrenchy
paulfrenchy replied the topic: Re: Gauge Panel Blanks
you can get an aluminum dash (one-Piece) on Kartek

www.kartek.com/Product/Fiberglass/Baja5.html

PF
#1116

Please Log in or Create an account to join the conversation.

More
5 years 8 months ago #17582 by M.E.A.D. Racing
M.E.A.D. Racing replied the topic: Re: Gauge Panel Blanks
Race Ready Products in Chula Vista has the dash panels,
Just call ahead to make sure they are in stock.
That is the closest race shop to you from Mexico on the Pacific side.
Make a list, they usually carry everything for 5/1600 and 11 cars

Chuck Mead
M.E.A.D. Racing

619-520-8970

Please Log in or Create an account to join the conversation.

Time to create page: 0.160 seconds